Airtech Advanced Materials Group Introduces NEW LTC3 Carbon Prepregs 

Source: Airtech

LTC3 Carbon Prepregs - Airtech

Huntington Beach, CA – October 29, 2018: LTC3 Carbon Prepregs offer a low temperature cure and high temperature use after post cure. LTC Prepregs allow the use of lower cost master model materials. 

LTC3-G1400 is a light weight tooling prepreg with a low temperature for the manufacture of composite tooling laminates capable of high temperature use. 

LTC3-G1600 is a heavy weight tooling prepreg with a low temperature cure for the manufacture of composite tooling laminates capable of high temperature use. 

LTC3-G1800 is a heavier weight tooling prepreg used to produce molds with a low temperature cure. The heavy weight material is used to build laminate bulk faster thus reducing the number of plies required. Saving up to 30% labor time on standard laminates, plus cost savings. 

LTC3 Carbon Prepregs

Benefits: 

  • Lower CTE effect, greater tooling accuracy, less tool/part reworking. 
  • Lower cost, low temperature master model materials. 
  • Lower cost tooling laminates with heavier bulk ply G1800. 

Share This Post

Leave a Reply

Lost Password

Register